Diaphragm type Vacuum Pumps

DTU/MD Series

MD4UCNT

Outline

This is a vacuum pump that evacuates by the reciprocating motion of a rubber thin film (diaphragm). Simple structure and easy handling. MD4UCNT is a high vacuum and high corrosion resistant type.

Features and Cautions on use

  • High vacuum type diaphragm pump.
  • Low vibration.
  • High corrosion resistant.

Specification

Pumping speed unit

Pressure unit

Item Unit 50Hz 60Hz
Actual Pumping Speed L/min 50 60
Ultimate Pressure Pa 150
kPa -101.2 #1
Motor Output W 250
Weight kg 14.3
Inlet, Outlet port diameter mm O.D.φ11×I.D.φ6.5
Ambient temperature 10~40
Overall dimensions mm 243(W) × 325(L) × 198(H)
RoHS applied

#1: Gauge pressure

Power Supply/Voltage

VoltageCertificateRemarks
Single phase, 100-120V/200-230VCE

■TUV Certification: A high-quality product that complies with European standards as assessed by an international third party that conducts product safety testing and certification.

Outline Drawing

Pumping Speed Curves

Remarks

  • The pump is stopped when the lord is operated, and the pump can’t be operated just after that. In this case, please return the atmospheric pressure the inside of the pump.
  • Please make sure the particles or dust may not come inside
  • the pump directly. In case of pumping the gas containing the moisture, dust or so, that must be removed.
  • It is a pump only in the room. Please do not set it up in the place, that rain and water splash, and outdoors.
  • It may cause the failure of the pump if it is used for long hours
  • close to the atomospheric pressure.

Download Service