Rocking Piston Type Vacuum Pumps

DOP Series

DOP-80S

Outline

This is a vacuum pump that evacuates by reciprocating the piston in the cylinder. Simple structure and easy handling.

Features and Cautions on use

  • Rocking piston type vacuum pump creates vacuum by reciprocal motion of cup packing inside the cylinder.

Specification

Pumping speed unit

Pressure unit

Item Unit 50Hz 60Hz
Actual Pumping Speed L/min 80 88
Ultimate Pressure Pa 5.33×103
kPa -96 #1
Motor Output W 210
Weight kg 7
Inlet, Outlet port diameter mm O.D.φ9×I.D.φ5 (Rc 1/4)
Ambient temperature ℃ 7～40
Overall dimensions mm 160(W) × 270(L) × 179(H)
RoHS applied ●

#1: Gauge pressure

Power Supply/Voltage

VoltageCertificateRemarks
Single phase, 100V―
Single phase, 115V―
Single phase, 200V―
Single phase, 220V―

■TUV Certification: A high-quality product that complies with European standards as assessed by an international third party that conducts product safety testing and certification.

Outline Drawing

Pumping Speed Curves

Remarks

  • The pump is stopped when the lord is operated, and the pump can’t be operated just after that. In this case, please return the atmospheric pressure the inside of the pump.
  • The pump will not often operate normally if it is used with corrosive gases, organic solvents, liquids, or condensed gases (eg steam). The pump will not often operate normally if it is used with gases containing particles or dust etc.
  • Cup packing that is the sliding material of the pump will be worn out by operating, and microscopic particles result from wear of component. Moreover, wear is promoted because the sliding material is weak in moisture, and the pump life decreases if the vacuum gas is moisture. Please suck neither moisture nor condensed gas (steam etc.).
  • It is a pump only in the room. Please do not set it up in the place, that rain and water splash, and outdoors.
  • Anti-vibration rubber must be equipped when the pump is
  • being fixed to the systems. The size of the screw for the
  • anti-vibration rubber is M5 * P0.8. In addition, the length of the
  • screws on pump side must be no longer than 10mm.

Applied optional part items

No. Category name Series Name
1 Maintenance Kit Maintenance Kit Series Maintenace Kit for DOP-80S
2 Anti-vibration Rubber Anti-vibration Rubber Anti-vibration rubber (ME-15cut)

Download Service